3 views

When will the third-generation BYD Tang launch in China?

IT Home reports that the third-generation BYD Tang will officially launch in China on 24 November 2026, after pre-sales opened on 13 November with prices starting from 225,000 yuan. The article describes a large five-seat SUV with three listed versions, including rear-wheel-drive and all-wheel-drive models.

This is a Chinese launch report, not a European sales announcement. IT Home does not report European availability, pricing, homologation or any change for people who already own a BYD Han outside China.

Is the third-generation BYD Tang launching on 24 November?

IT Home reports that BYD plans to officially launch the third-generation Tang on 24 November 2026. According to IT Home, pre-sales for the model opened on 13 November, with a starting price of 225,000 yuan.

That is useful if you are following BYD’s Chinese lineup, but it is still only a launch date for China. IT Home’s report does not say where the formal launch event will take place, and it does not mention sales in Europe.

What are the BYD Tang pre-sale prices in China?

According to IT Home, BYD has listed three third-generation Tang versions for pre-sale, starting at 225,000 yuan and reaching 260,000 yuan for the all-wheel-drive version.

Version listed by IT HomePre-sale priceClaimed electric range
850 km rear-wheel-drive laser premium225,000 yuan850 km CLTC
850 km rear-wheel-drive laser flagship240,000 yuan850 km CLTC
770 km all-wheel-drive260,000 yuan770 km CLTC

IT Home reports that the 850 km figure applies to the rear-wheel-drive versions, while the all-wheel-drive version is listed at 770 km under the CLTC cycle.

Range labels are useful for comparing Chinese-market versions on paper, but they are not a motorway answer by themselves. I have written separately about what real motorway range looks like in a BYD Han, because the driving condition matters as much as the number.

What does the third-generation Tang include?

IT Home reports that the third-generation Tang uses a five-seat layout, is more than five metres long and has a wheelbase close to three metres. According to IT Home, the second-row legroom is listed at 1,003 mm and the rear seatback can recline to 130 degrees.

IT Home also reports that all four outer seats have ventilation, heating and independent ten-point massage, while the front passenger seat is described as a zero-gravity seat. Those are the kinds of specification-sheet details that make the Tang look more like a flagship family SUV than the older seven-seat Tang many European readers may remember.

According to IT Home, the cabin has a 35.4-inch integrated driving-information display and a 30-inch panoramic screen for interaction and entertainment. IT Home says the vehicle also has voice control with dialect recognition and whole-cabin voiceprint recognition.

How quick is the all-wheel-drive BYD Tang?

IT Home reports that the rear-wheel-drive Tang has a 300 kW motor, while the all-wheel-drive version has combined output of 515 kW. According to IT Home, the all-wheel-drive dual-motor version is listed with a 0–100 km/h time of 4.3 seconds.

IT Home says the model uses BYD’s second-generation Blade Battery and flash-charging technology. The report also says the Tang has front double-wishbone and rear five-link independent suspension, plus a dual-chamber air suspension system in the official information it cites.

Does this BYD Tang announcement confirm European sales?

No. IT Home’s report is about a Chinese pre-sale and a Chinese launch date, and it does not state that the third-generation Tang will be sold in Europe.

That distinction matters. A Chinese-market price, CLTC range figure and equipment list do not become a European specification just because the badge is BYD. Until BYD says where the model will be sold and under what specification, this is simply a Chinese-market Tang story.

Does the new Tang change anything for my BYD Han in Portugal?

My BYD Han was bought new in China and is driven in Portugal. IT Home’s report is about the third-generation Tang’s Chinese launch and specifications; it does not say that an existing Han changes in any market.

So there is no retrofit, software update, parts promise or support change hiding in this announcement. It is a new-model launch report, nothing more. Still, it is worth watching because it shows where BYD is putting its flagship-SUV equipment and pricing in China now.

FAQ

When will the third-generation BYD Tang launch in China?

IT Home reports that the third-generation BYD Tang will officially launch on 24 November 2026.

How much does the new BYD Tang cost in China?

According to IT Home, pre-sale prices start at 225,000 yuan and rise to 260,000 yuan for the listed all-wheel-drive version.

What electric range does the third-generation Tang claim?

IT Home reports CLTC figures of up to 850 km for the rear-wheel-drive versions and 770 km for the all-wheel-drive version.

Is the new BYD Tang a five-seat or seven-seat SUV?

IT Home reports that all versions of the third-generation Tang use a five-seat layout.

Will the third-generation BYD Tang be sold in Europe?

IT Home does not report European sales, European pricing or a European launch date. This article is not confirmation that the model is coming to Europe.

Does the Tang announcement change anything for existing BYD Han owners?

No change is stated. IT Home’s report concerns the Chinese launch and specification of a new Tang, not updates for existing Han owners.

Source

This post is based on a single tier-M source: IT Home’s report on the third-generation BYD Tang, published on 16 November 2026. IT Home reports that BYD opened pre-sales on 13 November and will officially launch the model on 24 November; the article does not say where either action took place. The original report is in Chinese, and every translation of its claims, prices and specifications here is my own translation. IT Home is the source of those claims, not me.


Leave a comment

Your email address is not published. Comments are moderated, so yours may not show up right away.